Restrictions
- Tide Entrance
- Swell Entrance Restriction
- Ice Entrance Restriction
- Other Entrance Restriction
- Overhead Limitations
Port Equipment
Crane
- Fixed
- Mobile
- Floating
Lift Capacity
- 0-24 Mts
- 25-49 Mts
- 50-100 Mts
- 101+ Mts
Service
- Longshore
- Electrical
- Steam
- Navigation Equipment
- Electrical Repair
Other
- Repair code: Limited
Navigation
- Good Hold Ground
- Turning Area
- Eta Message
- Pilotage Compulsory
- Pilotage Available
- Pilotage Advisability
- Local Assist
- Tug Salvage
- Tug Assistance
- Wharves
- Anchor
- Med Mooring
- Beach Mooring
- Ice Mooring
Communication
- Phone Comm
- Fax Comm
- Radio Comm
- Vhf Comm
- Air Comm
- Rail Comm
- Quarantine Pratique
- Quarantine - Sanitation
- Other Quarantines
- First Port of Entry
- US Representative
FAQ about BANTEN port (IDBTN) — Indonesia
Key information on BANTEN Port.
BANTEN (UN/Locode: IDBTN), Indonesia is a seaport located at approximately -6.02000° N, 105.97000° E.
What type of vessels BANTEN Port handles?
Port usage is Cargo (45.95%), Other (29.73%), Tanker (21.62%) and Passenger (2.7%).
Where is BANTEN Port located?
Coordinates: -6.02000° N, 105.97000° E.
- CIGADING — UN/Locode: IDCIG — -6.00997° N, 105.95740° E
- CIWANDAN — UN/Locode: IDCIW — -6.01821° N, 105.95190° E
- ANYER KIDUL — UN/Locode: IDANR — -6.05000° N, 105.92000° E
What are the key facilities and depths at BANTEN Port?
Harbor type/size: Open Roadstead and Very Small. Cranes: mobile cranes and floating cranes. Lifting: 0–24 MT lifts, 25–49 MT lifts, 50–100 MT lifts and 100 MT+ lifts. Support: wharf loading/offloading. Depths: channel depth 14m - 15.2m; anchorage depth 20.1m - 21.3m; cargo pier depth 14m - 15.2m; oil terminal depth 17.1m - 18.2m and maximum draft approx. 10 m.
What restrictions apply at BANTEN Port?
Entrance/operational restrictions — tide: no specific restriction; swell: no specific restriction; ice: none; overhead limits: none and other: may apply.
What communication options and marine services are available?
Communication & port formalities — telephone: not available; radio (VHF): available; air services: not available; rail: available; ETA message: required; quarantine pratique: available; deratting certificate: not available; first port of entry: not available and additional quarantine services available. Pilotage & towage — pilotage: compulsory; tug assistance: available and tug salvage: not available.
What vessel types and sizes do BANTEN Port handle?
Vessel types historically calling: Bulk Carrier, General Cargo, Offshore, Passenger, Tanker, Tugs Harbor Craft and Unspecified. Typical extremes observed (AIS-derived): max LOA: 293; max beam: 46; max draft: 11.83; max DWT: 78,988; max GT: 111539; max NT: 33461; min LOA: 5; min beam: 2; min draft: 5.1; min DWT: 1622; min GT: 2561; min NT: 923 and build year: 1990.
Ship Agents at port
Service Providers at port
Suppliers at port
Shipyards at port
| Port Usage | |
|---|---|
| Unlocode | IDBTN |
| Latitude / Longitude | -6.02º, 105.97º |
| Country | Indonesia |
| Channel Depth | 14m - 15.2m |
|---|---|
| Anchorage Depth | 20.1m - 21.3m |
| Cargo Pier Depth | 14m - 15.2m |
| Oil Depth | 17.1m - 18.2m |
| Offshore Maximum Vessel Draft (m) | 10 |
Nearby Ports
| Harbour Type | Open Roadstead |
|---|---|
| Harbour Size | Very Small |
